MKP185K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP155K300V ~（305V）
MKP155K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP125K300V ~（305V）
MKP125K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP105K300V ~（305V）
MKP105K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP824K300V ~（305V）
MKP824K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP684K300V ~（305V）
MKP684K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP564K300V ~（305V）
MKP564K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP474K300V ~（305V）
MKP474K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.