MKPX2-THB高温高湿双85安规电容器
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP X2-LN 金属化聚丙烯膜低噪音安规电容器
MKP X2-LN 金属化聚丙烯膜低噪音安规电容器
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKPX2金属化聚丙烯膜安规电容器(305VAC)
型号 容量（uF） 电压（VA […]
MKP475K300V ~（305V）
MKP475K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP395K300V ~（305V）
MKP395K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP365K300V ~（305V）
MKP365K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP335K300V ~（305V）
MKP335K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP305K300V ~（305V）
MKP305K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP225K300V ~（305V）
MKP225K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.
MKP205K300V ~（305V）
MKP205K300V ~（305V）
X2-MKP为无感结构，用金属化聚丙烯膜作为电介质/电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。
X2-MKP are non-inductively wound with metallized Polypropylene film as the dielectric/electrodewith copper-clad steel leads and encapsulated in a plastic case sealed with epoxy resin.